Redinfra Systems Private Limited

Safety Light Curtains are used for preventing of hand / Finger / body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Processing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPMs. For eg Presses, Injection Molding machines etc,

nfra Systems offer electro pneumatic system providing multiple benefits for the user. For pneumatic / hydraulically operated presses safety light curtain can be easily installed. However it cannot be used directly for mechanical press.

Infra: Offer Type 4 Safety Curtains For Finger, Hand And Body Safety.
We Offer High Level Safety With International Approval Ce Approved And Type 4 Safety.
Our Products Are Used On All Spm Machines, Hydrauluc Presses, Power Presses, Pneumatic Machines.

Additional Information:

• Delivery Time: 3 WORKING DAYS

nfra , offers new generation Safety Light Curtains / Safety Guards based on advanced micro controller technology. For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area

Safety Light Curtain Finger Protection. – 20mm pitch

 

 

Infra , offers new generation Safety Light Curtains / Safety Guards based on advanced micro controller technology. For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.
Product Details:

Safety Light Curtains are used for preventing of hand / Finger / body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Processing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPMs. For eg Presses, Injection Molding machines etc,

• Operating Temperature	Up to 55 Degrees centigrade
  Vibration Resistance	Amplitude 0.75 mm (p), Frequency 10 - 55 Hz, Rate 1 Octave / min
  Supply Protection	Reverse Polarity Protected
  Brand	INFRA
  Power Supply	12 - 24 Volts DC
  Output Indications	Through LEDs
  Protected Heights	100 - 1850 mm
  No of Beams	6, 12, 10, 16,18, 24, 30,36,42
  Cross Section	30 x 30 mm
  Standard Cable Length	5 meters for emitter, 3 meters for receiver

Infra now offers very sleek type safety curtains. This are used where there are space limitations.
Features:

• Easy to install & may be mounted in any position.
• Barrier operates on cyclic scanning photo
• Non-critical alignment between Emitter & Receiver
• Easy to install & may be mounted in any position. Vertical or Horizontal.
• Non-critical alignment between Emitter & Receiver.
• Blanking / by-passing individual channel is provided through software.
• Unaffected by mains power fluctuations. Machine OFF if screen is too dirty or oily.
• Barrier operates on cyclic scanning photo-electric infra-red techniques.
• Various barrier range heights are available from covering 90 mm to 1710 mm .
• Higher covering heights available upon request.
• Use of solid state components & special construction technique ensures that
•  barrier is not affected by normal vibrations & shocks.
• For Sensors, connections are provided through plug in connectors.
• Self Checking Circuitry with two outputs continuously monitors failure of any of the
•  beam in the system and stop the machine if failure detected.
• LED Indications are provided for status indication of each channel.
• LED indication for output and sense.
• Choice for suitable Control Unit available to suit different working conditions.
• Flexible fixing arrangements to suit individual requirement.
• Increases productivity while maintaining required safety.

Additional Information:

• Item Code: 422007
• Production Capacity: 50 set 1 days
• Delivery Time: 2 days
• Packaging Details: box

Product Details: Infra: Offer Type 4 Safety Curtains For Finger, Hand And Body Safety.
We Offer High Level Safety With International Approval Ce Approved And Type 4 Safety.
Our Products Are Used On All Spm Machines, Hydrauluc Presses, Power Presses, Pneumatic Machines.
We Offer Huge Range Of Sensors.
Check Our Catalogue And Website For All Products.

Additional Information:

• Delivery Time: 3 Working Days.

Infra , offers new generation Safety Light Curtains / Safety Guards based on advanced micro controller technology. For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.
Product Details:

• Easy to install & can be mounted in any position. Vertical / Horizontal.
• Non-Critical alignment between Emitter & Receiver.
• Blanking / By-Passing individual channel is provided through software.

Additional Information:

• Delivery Time: 3 WORKING DAYS

Safety Light Curtains are used for preventing of hand / Finger / body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Processing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPMs, For eg Presses, Injection Molding machines etc.

Additional Information:

• Production Capacity: 50 set 1 days
• Delivery Time: 3 WORKING DAYS
• Packaging Details: 1 box

Safety light curtains are an advanced method of safeguarding personnel around many hazardous machines. Safety light curtains offer freedom, flexibility and reduced operator fatigue when compared with traditional guarding methods such as mechanical barriers, sliding gates and pull-back restraints.

Infra Systems offer Safety Light For Mechanical Presssafety light curtain can be easily installed. However it cannot be used directly for mechanical press.

Following Two Models are available

Model: THS 02 - The controller is having facility to connect two push buttons, facility of connecting Safety light curtain is not provided.

Model: THS 03 - The controller is having facility to connect two push buttons and facility of connecting Safety light curtain. Caution - In case of mechanical press, the ram cannot be stopped once it has been started from TDC. It cannot be stopped in between. This is the limitation of press itself. However the stroke would not start if hand is obstructing the beam.

System details

The system consist two push buttons and a controller. When both the push buttons are pressed, the output relay from the controller gets ON. When both the switches are operated, the output relay gets on for 1 sec and automatically gets off. The controller will operate a solenoid valve which in turn will operate a pneumatic cylinder. This pneumatic cylinder is used to pull the DOG of the rolling key press. Once the DOG is released for position, the stroke is completed.

Two Hand Safe Operation :-

The stroke is allowed once only when both the switches are pressed at a time. The multiple strokes will not be continued if both the push buttons remains continuously pressed. You have to release the push button and press again. So both the hands of the operator are engaged to operate press.

Safety Light Curtain:-

Safety light curtain can be connected with the controller. When safety light curtain is installed, operator will not be able to start the press when hand is blocking the beam. When some object is there between the two sensors, the output relay will not get ON even if the both the PUSH BUTTONS are pressed.

Ease Of Operation  :-

Safety light curtain can be connected with the controller. When safety light curtain is installed, operator will not be able to start the press when hand is blocking the beam. When some object is there between the two sensors, the output relay will not get ON even if the both the PUSH BUTTONS are pressed.

Dual Relay for Safety Operation 

Output of the controller is provided through two relays with their contact in series. This is to provide enhanced safety

Features

• System Detail
• Two-Hand safe Operations
• Safety Light Curtain.
• Ease of Operation.
• Duel Relay For Safety Operation.

Infra systems, offers new generation Safety Light curtain Finger Protection on advanced micro controller technology. For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.

Features

• Easy to install & can be mounted in any position. Vertical / Horizontal.
• Non-Critical alignment between Emitter & Receiver.
• Blanking / By-Passing individual channel is provided through software.
• System operation is unaffected by mains power fluctuations.
• Machine OFF if screen is too dirty or oily.
• Barrier operates on cyclic scanning photo electric infrared techniques.
• Various barrier heights are available for covering 90 mm to 1890 mm .
• Higher covering heights available upon request.
• Use of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks.
• Sensor connections are provided through plug in connectors.
• Self Checking Circuitry with two outputs continuously monitors failure of any of the beam in the system and stop the machine if failure is detected.
• LED Indications are provided for status indication of each channel.
• LED indications are also provided for each output.
• Choice for suitable Control Unit available as per different working conditions.
• Flexible fixing arrangements to suit individual requirement.
• Increases productivity while maintaining required safety.
• Safety Light Curtains are used for preventing of hand / Finger / body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Processing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPMs, For eg Presses, Injection Molding machines etc.

 

Infra systems, offers new generation Safety Light Curtains / Safety Guards based on advanced micro controller technology. For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.

Safety Light Curtain Hand Protection. – 30-40mm pitch

 

Safety Light Curtains are used for preventing of hand / Finger / body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Processing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPMs, For eg Presses, Injection Molding machines etc.

INFRA SYSTEMS offers safety light curtain with controller wall mounting type

• LED Indication for Sense, Output1, Output 2, By-Pass
• Unit By-Pass switch provided inside the controller on Control PCB

Additional Information:

• Production Capacity: 1+
• Delivery Time: 3WORKING DAYS